KORTING OKB552CFX, Instruction Manual

DESCRIPTION OF TYPES OF COOKING PROGRAMMERS 

 
ELECTRONIC PROGRAMMER with 6 buttons for 5-functions and 9-functions ovens.  
(Figure 3.1 and 3.3)  

Description of buttons 

1 Time 

2 Cooking 

time 

3 

End of cooking  time 

4 Manual 

position 

5 

Scroll forward through all program numbers 

6 

Scroll back through all program numbers 

Description of illuminated symbols 

“AUTO” flashing – Programmer in automatic position, but 
not programmed 
“AUTO” always on - Programmer in automatic position, with 
program inserted 
“2” (symbol) – Automatic cooking functioning 
“1” (symbol) – Timer in use 
“2” and “AUTO” (both flashing) – Program error 
No symbol on, except the clock numbers – programmer set 
manually 

Digital clock 

Indicates hours (0-24) and minutes. Immediately after connection (as well as after a black-out), “0.00” will 
flash on the display. 
To set the correct time, press buttons “2” and “3” simultaneously, and at the same time, press one of the 
buttons “+” or “-“ until you have the correct time. 
The speed with which the numbers change on the display will increase a few second after pressing the 
buttons “+” or “-“. 
 

Manual cooking mode (without using the programmer) 

To use the oven without the help of the programmer, you will need to cancel the flashing “AUTO” message. 
To do so, just press button “4”.  
If the “AUTO” message is steady, showing that the oven has been programmed, you will need to cancel the 
program by pressing the button “4” so that the display shows “0”. 
 

Automatic cooking mode (start and end of cooking time) 

1) Program the length of cooking time with button “2” 
2) Program the end of cooking time with button “3” 
3) Select the desired temperature using the temperature regulation knob and select the desired function 
using the function selector knob. The “AUTO” symbol on the display will indicate that the oven has been 
programmed. 
Practical example: 
You want to cook for 45 minutes, ending at 14.00 
- By pressing “2” you set 0.45 on the display 
- By pressing “3” you set 14.00 on the display. 
After these operations the current time and the “AUTO” symbol will appear on the display, to indicate that the 
programming has been memorized. 
At 13.15 (14.00 less 45 min.) the oven will start automatically, and during cooking the symbols “2” and 
“AUTO” will be shown on the display. 
At 14.00 the cooking will stop automatically. An acoustic signal will sound. You can stop the acoustic signal 
by pressing button “1”. 

Semi-automatic cooking mode 

A)  Programming the cooking time. 
B)  Programming the end of cooking time. 

30