PL-090B_f.
19
•
Disinfection (only available in systems with DHW cylinder):
- Temperature: the value of the temperature in the tank during disinfection,
- Week day: the day for disinfection during automatic program,
- Hour: the time of disinfection in automatic program,
- Working time: time of disinfection (calculated from the moment the temperature
has reached disinfection value),
- Automatic mode: automatic start of disinfection at the set time (time, day of the
week),
- Ciculation: disinfection of the entire DHW installation or only the DHW cylinder
(available only with active circulation),
- Activate now: manual start of disinfection (independent of the day or time set).
•
Time/Date:
- - setting of the current system time (YEAR / MONTH/ DAY / HOUR).
•
Interface:
- Brightness min: setting the brightness of the display in stand-by mode.
- Brightness max: setting the brightness of the display during the work.
- Sound: Yes> On / No> Off
- Dial sensitivity: 1 - high / 4 - low.
•
Language:
- menu language setting
•
System:
- Type: EKCO.Mx3 (ID)
- MSK program: boiler’s driver version
- PW program: the version of panel’s program
- Max rated power: boiler’s set rated power
- Pump type: type of pump installed in the CH system
- Reset: boiler’s start-up
- Factory settings: restore to factory settings
Summary of Contents for EKCO.M3
Page 35: ...PL 090B_f 35...
