Page 25
PROBLEMS
If it appears that your DVD-Video player is faulty, first consult this checklist. It may be that something simple has
been overlooked. Under no circumstances should you try to repair the player yourself; as this will invalidate the
warranty. Only qualified service personnel can remove the cover or service this player.
*
When the unit is switched on the first time, S-Video will be the default video output. Press the V-SELECT button
to select the correct output modes. Your current output mode will show on the VFD.
NO POWER
•
Check if the on/off button on the front of the
player is set to on.
•
Check if power plug is properly connected.
•
Check if there is power coming from the AC
outlet by plugging in another appliance.
NO PICTURE
•
Check if the TV is switched on.
•
Select the correct AV input on the TV.
•
Check the video connection.
•
Check if channel selector is set to AV on the TV.
(See your TV manual for instructions).
•
When Progressive Scan is on, there is no video
output signal from composite video output. In
order to use Progressive Scan feature, you need
to connect the TV and DVD player through the
component video outputs.
•
Press the V-SELECT button to select the
correct video output mode. Otherwise no picture
or distorted picture will be found.
DISTORTED PICTURE
•
Check the disc for fingerprints and clean with
soft cloth, wiping from center to edge.
•
Sometimes a small amount of picture distortion
may appear. This is not a malfunction.
•
The disc format does not match the TV-set used
(PAL/NTSC).
•
Ensure that ONLY one video output is
connected.
NO COLOR IN PICTURE
•
The disc format is not according to the TV-set
used (PAL/NTSC).
•
Ensure DVD player is not connected through
VCR.
PICTURE INTERFERENCE
•
Relocate the unit further away from possible
interference or emission source (e.g. Radio,
Power Amplifier, radiator etc.).
NO RETURN TO START-UP SCREEN WHEN
DISC IS REMOVED
•
Check to see if the program requires another
disc to be loaded.
•
Reset by unplugging the player from the power,
then connect the power again.
THE PLAYER DOES NOT RESPOND TO THE
REMOTE CONTROL
•
Aim the remote control directly at the sensor on
the front of the player.
•
Avoid all obstacles which may interfere with the
signal path.
•
Inspect or replace the batteries.
NO SOUND
•
Check audio connections.
•
If using a Hi-Fi amplifier, try another sound
source.
•
Check that DTS digital out is selected in the
Audio Menu if a DTS disc is played.
•
Ensure there is a DTS decoder connected when
selecting DTS.
•
Clean the disc.
•
Check if the disc is defective by trying another
disc.
NO AUDIO AT DIGITAL OUTPUT
•
Check the digital connections
•
Check the Digital Out menu to make sure that the
digital output is correctly set.
•
Check if the audio format of the selected audio
language matches your unit capabilities.
DISC CANNOT BE PLAYED
•
Ensure disc is placed properly into the disc tray.
YOU HAVE FORGOTTEN THE PASSWORD
•
When the disc loading tray is empty, press
Number Key 7, Number Key 6, Number Key 4,
Number Key 1 and Number 8 on Remote Control
in order.
IMPROPER FUNCTIONING
•
The normal function of the product may be
disturbed by external interference. Just reset the
product (disconnecting and reconnecting the
power cord might be required to resume normal
operation).
