SETTINGS
Part of the landing page is the Settings section. In the settings you can:
Select a dark or light application mode (Pictures 6 and 7), or automatic switching between these modes depending on
ambient lighting (Picture 8);
Select the machine control method for the Remote Mode (Picture 9);
Choose the application language (English, Slovak, Czech) (Picture 9);
Modify and edit user settings (Picture 9).
CONTROL MODE
In the Settings section, you can also set the control mode.
The application allows two ways to control the machine: In Cabin Mode and Remote Mode.
The In Cabin Mode
is an application mode where the driver/vehicle operator controls the machine by steering it from
inside the cabin. The application serves the driver/vehicle operator similarly to the dashboard in a car. Via the application,
the driver can adjust the travel speed and hydraulic speed, switch on lights, wipers, the beacon, warning signs and turn
indicators.
The Remote Mode
allows remote control of the machine up to a distance of about 5 metres from the machine.
The user can choose whether they want to control travel of the machine via a single control lever and to control the bucket
(or other attachment) with the other control lever, i.e., the separate control mode, or whether they want to control travel
and the bucket via both the control levers, i.e., the combined mode.
For professional remote control, a radio controller is used that allows you to control the machine up to a distance of 15 metres
from the machine.
The application also serves as a security system against machine theft. The machine operation is tied to the specific user
and mobile device. User authentication in the application is done via an NFC chip or PIN.
Picture 3
Picture 4
Picture 5
10:30 AM
85%
10:30 AM
85%
10:30 AM
85%
4
Picture 7 - Light application mode
Picture 8 - View of the application setting options
Picture 6 - Dark application mode
Picture 9- View of the application setting options
10:30 AM
85
%
10:30 AM
85
%
10:30 AM
85
%
10:30 AM
85
%
5
