12
Cleaning and Disinfection Instructions
The Mover – Flexi/Mobi Pro Flexi is recommended to be cleaned and/or disinfected
regularly between each use, if necessary, or daily, as a minimum. If the Mover – Flexi/Mobi
Pro Flexi is soiled or in case of suspected contamination, follow the recommended cleaning
and/or disinfection procedures below before using the equipment.
Clean the Mover – Flexi/Mobi Pro Flexi with a damp cloth using warm water and a
disinfectant cleaner.
To ensure proper cleaning and disinfection always follow the steps below:
Cleaning / Disinfection (Steps 1-8)
1 Wear protective gloves and goggles.
2 Mix the disinfectant according to the instructions on the product label or according to the
mixing ratio in the IFU.
3 Apply the disinfectant on the Mover – Flexi/Mobi Pro Flexi.
4 Allow for disinfection time according to the instructions on the product label.
5 Use a clean cloth to wipe all surfaces especially handles, the crossbar and knee
upholstery.
6 Use a new cloth soaked in water to remove all traces of disinfectant. When removing
disinfectant periodically rinse the cloth under running water.
7 If the traces of disinfectant cannot be removed, spray water with a temperature of approx.
25°C (77°F) on the affected parts and wipe with disposable towels. Repeat until all traces of
disinfectant are removed.
8 Leave the parts to dry.
WARNING
To avoid falls the client must be positioned in accordance with this IFU.
WARNING
To avoid entrapment, ensure that the client's arms are kept on the crossbar and
feet on the footrest.
WARNING
To avoid the client falls or caregiver injuries ensure that there are two caregivers
present during the transfer of the client, if this is necessary according to the client
state.
