GG-11008 Edition 1.2
- 21 -
Clean and remount
Wipe the both sides of the lamp. Do not further disassemble the lens frame and mirror holder.
Wipe both sides of the lens (Figure 39) and one side of the mirror (Figure 40). Remount them
in the reverse order and bond the cover with Super-X, etc.
―
Cleaning lenses in section B
―
(1) Wipe five sides of lenses while sliding
For lenses in section B, five sides can be wiped as they are (Figure 41). For wiping side (6),
remove the focus lens unit.
To remove the focus lens unit, remove the connector and remove part (A) holding the timing
belt (Figure 41). Then, remove four screws and remove the focus lens unit (Figure 42).
Figure 39
Figure 40
(1)
(2)
(3)
(4)
(5)
Figure 41
A
Figure 42
(6)
