K20W Sound Writer User Guide
Page 3 of 12
Introduction
The K20W Sound Writer Programmer is designed to support the following IC:
-
K161004 (10 sec, 4 I/O OTP chip)
-
K162104 (21 sec, 4 I/O OTP chip)
-
K164208 (42 sec, 8 I/O OTP chip)
-
K208511 (85 sec, 11 I/O OTP chip)
-
K2N341N (341 sec, 15 I/O OTP chip)
This development system serves two main functions:
Compiler
–
to created a DAT file from user’s sound files
Writer
–
to program the DAT file into the voice chip
The
Compiler
is used to combine the edited sound files into the chip to form the desired
Voice Group and to define the playback functions of each Voice Group by selecting
different Options and Trigger Modes of each individual Voice Group.
The
Writer
is used to program the voice data into the voice chips that resulted from the
Compiler Function. The Writer must be connected to the PC to use the program.
System Requirement
This program only works with Windows XP and a computer with USB connector.
Installation
Installing the USB driver
If this is the first using this program, after connecting the USB cable to the computer, you
will be asked to install the USB driver. Follow the instructions on the screen to install the
USB driver.
Installing the Software
Create a new folder on your computer. Copy the K20W_Vxxx_yyyymmddtttt.ZIP to the
folder,
where “xxx” represents the version number and “yyyymmddttt” represents the date
and time of the software. Unzip the file into the folder.
