K20W Sound Writer User Guide
Page 9 of 12
Writer Window
After finishing the DAT file is created, you can program the DAT file onto the voice chip you
have selected.
Click the “Writer” tab to display the Writer Window. The following functions
are available:
Fig. 8
-
Load File
: To load the DAT file from the computer (Fig. 8)
After loading DAT file, the correct voice IC will be selected automatically and
displayed in the Device list box. The DAT file check sum is also displayed. If the DAT
is corrupted, it will have incorrect check sum and will not be loaded.
-
Blank Check
: To Blank check the inserted voice chip (Fig. 9 to 10)
If the Device list box does not show the voice chip you want, click the pull down list
and select the voice chip.
See “Inserting Voice IC section” on how to insert the IC on
the Writer). P
ress the “Blank” button to start the blank check.
-
Program
: After blank checking,
press the “Program” button to start programming.
-
Verify
:
Press the “Verify” button to Verify the data stored in the voice chip.
1. Press this button to load a
DAT file.
2. Device is selected automatically
3. File check sum is displayed here
