Koyker Pro 2585 Owner'S Manual Download | Manualshive

Page: 31 / 38

background image

Page 29

3 1/4” CYLINDER SERVICE KITS WITH 1 3/4” SHAFT

KIT NO. 675574:

              Complete kit with all seals needed to service one (1) 3 1/4” Cylinder. Consists of:
                            1 each                              3 1/4” Gland “O” Ring
                            1 each                              3 1/4” Backup Ring
                            1 each                              1 3/4” U-cup Seal
                            1 each                              1 3/4” Rod Wiper
                            2 each                              3 1/4” U-cup Seal
                            1 each                              1” Rod “O” Ring
                            1 each                              1” Locknut

KIT NO. 675572:

              Complete assembled 3 1/4” Cylinder Gland with all seals.  Consists of:
                            1 each                              3 1/4” Aluminum Gland
                            1 each                              3 1/4” Gland “O” Ring
                            1 each                              3 1/4” Backup Ring
                            1 each                              1 3/4” U-cup Seal
                            1 each                              1 3/4” Rod Wiper
                            1 each                              1” Locknut

KIT NO. 675576:

              Complete assembled 3 1/4” Cylinder Piston with all seals.  Consists of:
                            1 each                              3 1/4” Aluminum Piston
                            2 each                              3 1/4” U-cup Seal
                            1 each                              1” Rod “O” Ring
                            1 each                              1” Locknut

KIT NO. 675573:

              All seals needed to service one (1) 3 1/4” Cylinder Gland.  Consists of:
                            1 each                              3 1/4” Gland “O” Ring
                            1 each                              3 1/4” Backup Ring
                            1 each                              1 3/4” U-cup Seal
                            1 each                              1 3/4” Rod Wiper
                            1 each                              1” Locknut

KIT NO. 675575:

              All seals needed to service one (1) 3 1/4” Cylinder Piston.  Consists of:
                            2 each                              3 1/4” U-cup Seal
                            1 each                              1” Rod “O” Ring
                            1 each                              1” Locknut

«
...
29
30
31
32
33
...
»

Summary of Contents for Pro 2585







































Reviews:

No comments

Related manuals for Pro 2585

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands