COMPLETE THE INSTALLATION (continued)
5.
REPLACE THE GLASS. Refer also to Figure 2, page #6.
A)
Align the slots in the top of the glass assembly over the tabs on the fireplace.
B)
Place the glass assembly so it is flush with the front of the fireplace front.
C)
Secure the assembly to the fireplace by pushing the two spring loaded handles (located under the firebox)
back, locking them into position.
WARNING:
DO NOT OPERATE THIS FIREPLACE WITH THE GLASS ASSEMBLY REMOVED,
CRACKED OR BROKEN. Replacement of the glass should be performed by a
licensed or qualified service person.
6.
GRILLS
Upper Grill - Install:
A.
Insert the upper grill rods into the holes in the upper grill opening and push up until the bottom of the rods
clear the glass frame.
B.
Place the bottom of the rods into the lower holes and release. The grill will set down into place.
Remove
:
A.
Lift the upper grill up far enough to clear the bottom holes and pull bottom of grill out.
7.
Lower grill - See Figure 16
Install:
A.
Remove the 1/4" nuts (B) from the lower grill assembly.
B.
Slip the bolt through the hinge (A).
C.
Re-attach the 1/4" nut (B).
D.
Repeat “A” through “C” for the remaining hinge.
The grill is now in place. The grill may be lowered for lighting purposes, etc.
Remove:
A)
Remove the 1/4" nuts (B) from the lower grill assembly.
B)
Pull the entire grill assembly out of
the hinges.
C)
Re-attach the 1/4" nuts (B).
Figure 16
Page 22
