- 7 -
5.4 Detached Front Camera Installation:
(1) Choose installation positions of front on front windshield.
(Note: It is recommended to install the front camera behind the rear view mirror.)
(2) Clean and dry windshield before installation.
(3) Remove protective films of double-sided stickers and stick front camera to selected
positions separately.
(4) Arrange camera cable and plug into front camera port
Warning:
Don't install front in locations that blocks driver's field of view. Don't let camera
cables obstruct the visual field of dash cam and driver.
5.5 Rear Camera Installation :
1) Check whether the rear camera can work well at first.
2) Choose the installation positions(Two options):
Position 1:
Install the rear camera near the license plate.
Note: Position 1 is highly recommended. It support rear viewing and parking
assistant
.
Installation steps for position 1:
1) Run rear camera cable along from top of windshield, door frame, A-pillar, B-pillar, car
boot and all the way to car license plate, and hide the cable behind car rubber seals.
2) Find a suitable installation position near license plate. Then fix rear camera with the
provided screws and rear camera holder to the selected position.
(Note: It is recommended to set rear camera angle pointing slightly down.)
3) Plug the rear camera port into AV-IN/AHD1 port on dash cam.
4)
Connect the red cable on rear camera cable to the positive pole of the reversing
light
.
5) (Note: If you don’t need reversing guild, you can choose not to connect the reversing
light.)
