7
B-05
V.1.0
03.12.2020
Sete/ Seat:
5.
Festeplaten kan flyttes til fremre posisjon hvis ønskelig. Plasser de to skruhendlene i
korresponderende gjengede hull og skru begge to godt til. For å hindre at hendlene blir
ødelagt anbefaler vi å dra de to hendlene opp og rotér dem som vist på illustrasjonen
/ The handlebar reach can be reduced by by moving the fastening plate to the forward
position. Place the two handles in corresponding threaded holes and tighten both handles
firmly. To avoid damage to the handles, we recommend that the two handles are pulled up
and rotated to the position shown on the illustration.
6.
Justering/ Adjustment:
7.
Høydejustering: Løsne klemmen, flytt setet til ønsket høyde og stram klemmen / Height
adjustment: Loosen the clamp, move the seat to desired height and tighten the clamp
8.
Dybdejustering / vinkeljustering: Løsne de to skruene (en på hver side), flytt setet til ønsket
posisjon og stram godt til / Adjustment of seat depth and seat angle: Loosen the two screws
(one on each side), move seat to desired position and tighten both screws firmly
Clamp
Screw
Fastening plate
Handles