SPECIFIC SAFETY RULES
Always wear safety goggles and a dust mask
when sanding, especially when sanding
overhead.
A suitable breathing respirator must be worn
while sanding chemically pressuretreated
surfaces.
This KRAFTtech sander is not suitable for wet sanding
. Using this tool for this purpose
could cause electric shock.
Do not use sandpaper that is larger than needed
. Extra paper that extends beyond the
sanding pad can cause serious lacerations.
This KRAFTtech sander is equipped with a dust extraction port.
Dust from the sanding
operation can be removed by attaching either a shop vacuum hose or the dust collection
bag included with the tool. When using the collection bag, be sure to empty it frequently.
Never discard sanding dust in the area of or on an open flame, as these fine wood particles
can be highly combustible.
Use of damaged cords can shock
,
burn, or electrocute.
TECHNICAL SPECIFICATIONS
Model
PS160CA-3
Rated Voltage
120V~ 60Hz
Rated Power Input
1.5A
No Load Speed, n
0
13,000/min
Sandpaper
1/4 sheet
V: Volts
A:Amperes
~: Alternating Current
Hz: Hertz
KRAFTtech
PS160CA-3
Page 5
