・
Do not change the position of the telescopic ladder while you are standing on it.
・
Ensure that the plastic end caps are always attached to the telescopic ladder. Do not use the ladder without
plastic end caps. They prevent dirt, dust, etc. from entering the telescopic tubing and causing damages.
・
Objects, work equipment, etc. Which must be transported while climbing up the telescopic ladder, should not be
heavy and easy to handle.
・
Keep the telescopic ladder away from children and supervised persons.
LOCKING MECHANISM
WARNING
! Check before every use the proper function of the locking mechanisms. If the locking
mechanisms are not working properly, do not use the ladder.
Each ladder rung is locked with two lock pins, on either side of the rungs. The pins act automatically when
unfolding or folding the ladder.
Each locking pin has a locking indicator, which indicates if a rung is locked or unlocked.
Red: Rung is unlocked
Green: Rung is locked
EXTEND THE LADDER TO IT'S FULL LENGTH
WARNING!
Before using the ladder all the extended rung sections must be locked.
1. Place the telescopic ladder on solid and level ground.
2. Stabilize the telescopic ladder with one foot on the lowest rung (Fig. 1).
3. Start extending the telescopic ladder at the top rung (Fig. 2).
4. Extend one rung at a time until all rungs are extended and the total length is obtained (Fig. 3).
5. Make sure the locking indicators on each unfolded rung switch from red to green (rung is locked) (Fig. 4)
Please note that, while extending the telescopic ladder beginning with the top rung, the ladder is not locked and
retracts if not all rungs are extended.
4
shows green
Fig. 1
Fig. 2
Fig. 3
Fig. 4
