LADDER FAILURE:
・
Overloading the ladder.
・
Ladder condition, e.g. damaged rungs, wear and tear.
ELECTRIC HAZARDS:
・
Working on live wires, e.g. during electric troubleshooting.
・
Placing the ladder too close to live components, e.g. power cables at the ceiling.
・
Wrong ladder selection for electrical job.
MAINTENANCE AND CARE
Always keep the telescopic ladder clean. Remove dirt, abrasive dust, paint, glue, etc. after every use, before
retracting the telescopic ladder. Dirt can affect the proper functioning. Always wipe the rungs clean. Clean the
telescopic ladder with a broom or a cloth. Thoroughly dry the rungs if the telescopic ladder gets wet. To prevent
surface damage always protect the plastic end caps from dirt and abrasive dust, etc.
NOTE: LEAVE REPAIR AND MAINTENANCE WORK TO COMPETENT STAFF.
NOTE:
Before disposing of damaged, check with your state Environmental Protection Agency to find out
about special restrictions on the disposal of tool or return them to a KRAFTWERK certified service center
for recycling.
6
Cleaning
Drying
Greasing
Never use WD-40