![background image](http://html.mh-extra.com/html/kramer/fc-10/fc-10_user-manual_2001525009.webp)
Kramer Electronics Ltd.
7
5
FORMAT INTERFACES
This section describes all the controls and connections of your machine. Understanding the controls and
connections helps you realize the full power of your machine.
5.1
Getting to Know Your FC-10
The KRAMER FC-10 Composite-YC Transcoder is designed to interface between the two popular video
formats: Composite Video and YC (Super-Video). Hardly any VCR or camcorder transcodes from Composite
Video to Super-Video, although it is necessary when material shot in Composite is to be edited into a Y/C
production. The Kramer FC-10 is very small, and is fed from an external 12V DC supply, excellent for
fieldwork. Front/Rear panel features of the FC-10 are described in Figure 1 and Table
2
.
NOTE
For operation instructions refer to section 9.
Figure
1
: FC-10 Front/Rear Panel Features
Table
2
: FC-10 Front/Rear Panel Features
No.
Feature Function
1.
Power Switch
Illuminated switch supplies power to the unit.
2.
CV IN BNC connector
Composite video input.
3.
YC OUT 4P connector
s-Video output.
4.
YC IN 4P connector
s-Video input.
5.
CV OUT BNC connector
Composite video output.
6.
12VDC feed connector
A DC connector that allows power to be supplied to the unit.