166
K-CONFIG - Connecting to the Device
4.
Click
OK
.
Read is in Process:
Figure 310: Read Configuration from Device – Reading Process
Upon completion, the following message appears:
Figure 311: Read Configuration from Device – Reading Complete
The Device configuration is now uploaded to the PC.
10.9
Clear Configuration from Room Controller Device
To clear the room controller
device configuration
:
1.
Connect the PC to the Master or the standalone room controller.
2.
Click the
Connect
button (or select Connect from the Device menu list).
3.
In the
Device
menu, select
Clear Configuration from Device
.
The following message appears:
Figure 312: Clearing Configuration from Device – Warning Message