8
KDS-MP1 - Connecting the KDS-MP1
4
Connecting the KDS-MP1
Always switch off the power to each device before connecting it to
your
KDS-MP1
. After connecting your
KDS-MP1
, connect its power
and then switch on the power to each device.
To connect the KDS-MP1, as illustrated in the example in
Figure 2
, do the
following:
1. Connect the acceptor to one of the following outputs. The:
HDMI connector to an HDMI acceptor (for example, an LCD display)
VGA 15-pin HD connector to a VGA acceptor (for example, a VGA
display)
A/V 3.5mm mini jack to an analog A/V acceptor (for example, a
composite video display with audio)
2. Connect the Ethernet RJ-45 connector to the Network via CAT 5 cable.
3. If required, connect a USB memory stick to the USB connector (see
Sections
7.2.2
and
8
).
4. Connect the power adapter to the 12V DC socket on the
KDS-MP1
and to
the mains electricity (not shown in
Figure 2
).
!
