Kramer Electronics Ltd.
KIT-400
– Using Embedded Webpages
35
Defining Time and Date
KIT-400T
enables setting a device Time and Date locally or by Syncing the Device Time and
Date to any server around the world.
Setting Time and Date Locally
To set the device time and date locally:
1. In the Navigation pane, click
Device Settings
. The Device Settings page appears.
2. Select the Time & Date tab. The Time & Date tab appears.
Figure 20: Device Settings Page
– Time and Date Tab
3. Set Use Time Server (NTP) to
NO
.
Device Time & Date Fields are enabled, and network fields are disabled.
4. If required, change the:
▪
Device date.
▪
Device time.
▪
Time zone.
5. Select the time zone.
6. Set daylight savings time status (YES or NO).
7. Click
Save Changes
.
The device date and time is set.
