PT-2C - Defining the PT-2C Extended EDID Processor
5
4
Defining the PT-2C Extended EDID
Processor
defines the front and rear panels of the
PT-2C
.
Figure 1: PT-2C Front and Rear Panels
#
Feature
Function
1
EDID DESIGNER/F/W
UPDATE Mini USB
Connector
Connect to a PC/laptop running EDID Designer to
modify the EDID, or to update the firmware of the
PT-2C
2
IN LED
Lights green when an HDMI active signal source is
connected to the input
3
OUT LED
Lights green when an HDMI acceptor is connected to
the output
Blinks three times upon successful load of the
designed EDID and then resumes to normal operation.
4
ON LED
Lights green when power is connected
5
HDMI IN Connector
Connect to an HDMI source, (for example, a PC)
6
HDMI OUT Connector
Connect to an HDMI acceptor, (for example, a UHD
smart TV)
7
PROGRAM DIP-Switches
Set the device behavior, (see
Section 5.1
8
5V DC Power Connector
Connect to the supplied power adapter
