Overview
3
The transmission range between the HDMI source and the HDMI acceptor
can be extended up to:
•
90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded
BC-DGKat524
cable
•
90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded
BC-DGKat623
cable
•
100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded
BC-DGKat7a23
cable
For optimum range
1
and performance, use Kramer's
BC-DGKat524
,
BC-DGKat623
and
BC-DGKat7a23
cables.
3.1
WP-561/PT-561 HDMI Line Transmitter
The Kramer
WP-561
HDMI Line Transmitter
is a wall plate module that
receives an HDMI signal, encodes it, and transmits it over two CAT 5
cables to the
WP-562
or
PT-562
. The Kramer Pico TOOLS™
PT-561
HDMI Line Transmitter
is a standalone device that performs the same
functions as the
WP-561
. The
WP-561
/
PT-561
features:
•
An HDMI input , and a pair of RJ-45 CAT 5 output connectors
•
One power status LED
•
Bandwidth up to 1.65Gbps
•
EDID PassThru that passes EDID/HDCP signals from source to
display
•
A bidirectional IR input/output transmitting and receiving IR
commands over the CAT 5 cable
2
•
Power Connect™ feeding 5V DC over the CAT 5 cable from the
transmitter to the receiver
1 Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-
Kramer CAT 5, CAT 6 and CAT 7a cables may not reach these ranges
2 Compatible with a Kramer transmitter and via a Kramer external remote IR receiver: C-A35M/IRR or C-A35M/IRE or
C-A35M/2IRE
