PT-571HDCP/PT- - Defining the PT- DVI Line Receiver
7
7
5
Defining the PT- DVI Line
Receiver
The Kramer Pico TOOLS
PT-
DVI Line Receiver
receives an encoded
signal over a CAT 5 cable transmitted from the
PT-571HDCP
, decodes it, and
converts it to a DVI output.
The
PT-
has:
A DVI output connector
An RJ-45 CAT 5 input connector
One power status LED
Figure 2: PT- DVI Line Receiver
#
Feature
Function
1
12V DC
+12V DC connector for powering the unit
2
DVI OUT
Connector
Connect to the DVI acceptor
3
IN
RJ-45
Connector
Connect to the OUT RJ-45 connector on the
PT-571HDCP
4
ON
LED
Lights red when receiving power only, orange when output
and power are attached, and yellow when both an active
input and output are attached
