Your Line Transmitter, Receiver and Presentation Controllers
9
4.2
Your TP-122 XGA/Audio Line Receiver
define the
TP-122
XGA/Audio Line Receiver
:
Figure 3: TP-122 XGA/Audio Line Receiver
Table 5: TP-122 XGA/Audio Line Receiver Features
#
Feature
Function
1
12V DC
+12V DC connector for powering the unit
2
AUDIO
OUT
S/PDIF RCA connector
Connects to the digital audio acceptor
3
ANALOG 3.5mm Mini
Jack
Connects to the analog audio acceptor
4
LINE IN RJ-45 Connector Connects
to
LINE OUT RJ-45 connector on the TP-107AVR
5
XGA OUT 15-pin HD Connector
Connects to the XGA acceptor
6
LINK LED
Illuminates when receiving the correct input signal
7
LEVEL Trimmer
Adjusts
the output signal level
8
EQ.
Trimmer
Adjusts
the cable compensation equalization level
9
ON LED
Illuminates when receiving power
1 Using an STP CAT 5 cable with RJ-45 connectors at both ends (the PINOUT is defined in
Table 9
and
Figure 12
)
2 Degradation and VGA/XGA signal loss can result from using long cables (due to stray capacitance), sometimes leading to a
total loss of sharpness in high-resolution signals
3 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level
Summary of Contents for RC-108
Page 6: ...Getting Started 3 ...