KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the Remote Control Machine
20
7.3 Confirming Settings
You can choose to work in the At Once or the Confirm mode.
In the At Once mode (TAKE button is dim):
Pressing an
OUT-IN combination implements the switch immediately
You save time as execution is immediate and actions require no user
confirmation
No protection is offered against changing an action in error
In the Confirm mode (TAKE button is lit):
You can key-in an action and then confirm it by pressing the TAKE button
Every action requires user confirmation, protecting against erroneous
switching
Execution is delayed
1
until the user confirms the action
7.3.1
Toggling between the At Once and Confirm Modes
To toggle between the At Once and Confirm modes, do the following:
1. Press the darkened TAKE button to toggle from the At Once mode (in which
the TAKE button does not illuminate) to the Confirm mode (in which the
TAKE button illuminates).
Actions now require user confirmation and the TAKE button illuminates.
2. Press the illuminated TAKE button to toggle from the Confirm mode back to
the At Once mode.
Actions no longer require user confirmation and the TAKE button no longer
illuminates.
1 Failure to press the TAKE button within 45 seconds (the Timeout) will abort the action
