Kramer Electronics Ltd.
RTBUS
‑
25xl
– Installing the RTBUS
‑
25xl
7
Mounting the RTBUS
‑
25xl in the Table
To mount the unit, follow these steps:
Step 1
: Insert the
RTBUS
‑
25xl
into the
hole cut into the table making sure the
outer rim is firm against the surface of the
table.
Step 2
: From underneath the table, slide
the mounting brackets into the appropriate
slots.
Step 3
: Tighten the butterfly mounting
screws securely upward against the table.
Step 4
: Lock the mounting screws into
position with the locking butterfly screws.
