Kramer Electronics Ltd.
10
5.4 Getting to Know Your SG-11 Sync to Green Adder/Stripper
The KRAMER
SG-11
Sync to Green Adder/Stripper interfaces between the two most widely used
professional Component Video formats - RGB with Sync On Green and RGBS. In many video studios and
production centers there is a need to convert from one format to the other and the KRAMER
SG-11
is the
perfect choice - as it operates simultaneously in both directions.
Front/Rear panel features of the
SG-11
are described in Figure 6 and Table 5.
NOTE
For operation instructions refer to section 9.
Figure 6: SG-11 Front/Rear Panel Features
Table 5: SG-11 Front/Rear Panel Features
No. Feature
Function
1.
Power switch
Illuminated switch: Supplies power to the unit.
2.
Green in
BNC connector
Green
signal input
.
3.
Sync in
BNC connector
Sync
signal input.
4.
G+S out
BNC connector
Combined
Green + Sync
output
.
5.
G+S in
BNC connector
Combined
Green + Sync
input.
6.
Green out
BNC connector
Separated
Green
output.
7.
Sync out
BNC connector
Separated
Sync
output.
8.
Sync Tip
switch
Selects either clamping the signal to a predefined -1VDC level or to
0VDC level.
9. Power
Connector
A 3-prong AC Connector allows power to be supplied to the unit.
Directly underneath this connector, a fuse holder houses the
appropriate fuse.
