Kramer Electronics Ltd.
20
EXCLUSION OF DAMAGES
Kramer’s liability for any defective products is limited to the repair or replacement of the product at our option.
Kramer shall not be liable for:
1) Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use
of the product, loss of time, commercial loss; or:
2) Any other damages, whether incidental, consequential or otherwise. Some countries may not allow
limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from place to
place.
NOTE
: All products returned to Kramer for service must have prior approval. This may be obtained from your
dealer.
NOTICE
This equipment has been tested to determine compliance with the requirements of:
EN-50081
:
"Electromagnetic compatibility (EMC);
Generic emission standard.
Part 1: Residential, commercial and light industry"
EN-50082
:
"Electromagnetic compatibility (EMC) generic immunity standard. Part 1:
Residential, commercial and light industry environment".
CFR-47
FCC Rules and Regulations:
Part 15- “Radio frequency devices:
Subpart B- Unintentional radiators
CAUTION!
Any user who makes changes or modifications to the unit without the express approval of the
manufacturer will void warranty and user authority to operate the equipment. Only a qualified
technician approved by Kramer Electronics should service the machine.
Use the supplied AC power cord (when applicable) to supply power to the machine and controllers.
Please use recommended interconnect cables to connect the machine to controllers and other
components.
