Defining the SG-6006 Genlock Multistandard SPG/SDI/Audio Generator
5
Table 1: SG-6006 Front and Rear Panel Features
#
Feature
Function
1
POWER
Switch
Illuminated switch for turning the unit ON or OFF
2
SETUP / MENU
LCD Display
Displays user interface messages and configuration menu
items
3
MENU
Button
Press to open the menu (see
Section 7.1
4
)
ENTER
Button
Press to load and save a set up, and enter the submenus
5
Button
Press to decrease numerical values or select from several
definitions
6
Button
Press to move down the menu list
7
Button
Press to move up the menu list
8
Button
Press to increase numerical values or select from several
definitions
9
GENLOCK
Button
Press to toggle between a genlocked generator and a free-
running generator
1
When lit, the machine will “genlock” to a valid reference input.
When not lit, the timing of the generator is internally generated
(free-running)
10
PANEL LOCK
Button
Press and hold
2
11
to lock/unlock the front panel buttons
REFERENCE
INPUT
BNC
Connector
Connect a reference input for genlocking the machine
12
LOOP
BNC
Connector
Connect to an additional machine to loop the genlocking
source
13
TERM
Button
When looping, release the TERM button
When not looping, terminate the line by pressing the button
14
ANALOG VIDEO OUTPUT
BNC
Connectors
Connect to the composite video acceptors (from 1 to 8)
15
SDI OUTPUT
BNC Connectors
Connect to the SDI acceptors (from 1 to 4)
16
AUDIO
OUTPUTS
AES 75
Ω
3
1+2
BNC
Connectors
Connect to an AES-3id digital audio acceptor (for channels 1
and 2)
4
17
3+4
Connect to an AES-3id digital audio acceptor (for channels 3
and 4)
4
18
AES/EBU
5
1+2
XLR
Connectors
Connect to an digital audio acceptor (for channels 1 and 2)
4
19
3+4
Connect to an digital audio acceptor (for channels 3 and 4)
4
20
ANALOG
RCA
Connectors
RIGHT
Connect to an analog audio acceptor
21
LEFT
22
BALANCED
ANALOG
XLR
Connectors
LEFT
Connect to a balanced analog audio acceptor
23
RIGHT
24
RS-232
9-pin D-sub Port
Connects to the PC or the Remote Controller
6
25
Power Connector with Fuse
AC connector enabling power supply to the unit
1 If a reference input is not connected, the GENLOCK button blinks when pressed
2 For about 3 seconds
3 Known in the industry as AES-3id
4 In accordance with the standard, the audio digital stream contains 2 audio channels
5 Known in the industry as AES3 Type I
6 Via a null-modem connection
