12
Tavor 8-Sub - Installing the Tavor 8-Sub
5.3.3
Connecting to a Receiver via the High Level Input
If the receiver does not have a dedicated subwoofer output, connect it to the
Tavor 8-Sub
using the
receiver’s speaker outputs via regular speaker wires. The
low frequencies will be set via the Crossover control knob.
To connect via the high level input:
1. Connect the Left + and
– speaker output connectors on the receiver to the +
and
– L HIGH LEVEL INPUT connectors on the
Tavor 8-Sub
, respectively,
using speaker wires.
2. Connect the Right + and
– speaker output connectors on the receiver to the
+ and
– R HIGH LEVEL INPUT connectors on the
Tavor 8-Sub
,
respectively, using speaker wires.
Figure 6: Connecting via High Level Input
