Kramer TOOLS TP-219HD, User Manual

KRAMER:  SIMPLE CREATIVE TECHNOLOGY

Connecting the TP-219HD and TP-220HD 

8 

Figure 4

 and 

Table 4

 define the 

TP-220HD

 underside panel: 

Figure 4: TP-220HD (Underside Panel) 

Table 4: TP-220HD (Underside Panel) Features 

# 

Feature 

Function 

1 

HS Switch 

Slide the switch up

1

 (to INVERTED) to invert the HS polarity 

Slide the switch down (to NORMAL) to retain the polarity 

2 

VS Switch 

Slide the switch up

1

 (to INVERTED) to invert the VS polarity 

Slide the switch down (to NORMAL) to retain the polarity 

5 

Connecting the TP-219HD and TP-220HD 

You can use the 

TP-219HD

XGA/HD – Line Transmitter/Switcher

 with the 

TP-220HD

XGA/HD – Line Receiver/DA

 to configure an XGA/HD DA 

system. This will let you transmit one selected computer graphics/HD signal 
to two displays via long line CAT 5 UTP cabling. 

To

connect the 

TP-219HD

 to the 

TP-220HD

, as the example in 

Figure 5

illustrates, do the following: 

1. On 

the 

TP-219HD

, connect

2

:  

ƒ

An XGA

3

 source (for example, Computer Graphics Source 1) to 

the INPUT 1 15-pin HD connector 

ƒ

An XGA

3

 source (for example, Computer Graphics Source 2) to 

the INPUT 2 15-pin HD connector 

2.  If necessary, set the HS and VS switches on the 

TP-219HD

 underside

4

. 

1 By default, both switches are set to NORMAL 

2 You do not have to connect both inputs 

3 Alternatively, you can connect an HD source, see section 

 5.1

4 By default, both switches are set to normal (see 

Figure 2

 and 

Table 2

)