TP-46N - Connecting a Component/UXGA/Audio Distribution System
11
6. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity on both the
TP-45
/
TP-45RC
and the
TP-46N
(not shown in
Figure 3
).
The signal from the component video source is transmitted via the CAT 5
cable; decoded and converted to component video and outputted on the Y,
C
B
/P
B
,
C
R
/P
R
OUTPUTS RCA connectors to the component video acceptor.
If you cannot connect the power to both the
TP-45
and
TP-46N
, connect it to the
TP-46N
only. If more than one
TP-46N
is connected, connect the power to each
TP-46N
unit
7. Connect the LINE OUT RJ-45 connector on the
TP-46N
to a second
TP-46N
unit (optional) (connect the required outputs to the second
TP-46N
).
8. Similarly, you can connect the LINE OUT RJ-45 connector on the
TP-46N
to
additional
TP-46N
units.
Figure 3: Distribution System, Component Video Mode
