KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the TP-581T, TP-582T and TP-582R
10
5
Connecting the TP-581T, TP-582T and TP-582R
You can use the
TP-581T
HDMI Line Transmitter
or the
TP-582T
HDMI
Switcher/Line Transmitter
with the
TP-582R
HDMI Line Receiver DA
to
configure an HDMI transmitter/receiver system.
•
To connect the
TP-582T
or
TP-581T
, see
Section 5.1
•
To connect the
TP-582R
, see section
Section 5.2
•
To remotely control the A/V equipment, see
Section 5.3
5.1 Connecting the TP-582T or TP-581T
To
connect the
TP-582T
or
TP-581T
as shown in the example in
Figure 4
,
do the following:
1. Connect the HDMI IN1 connector to the first HDMI source
1
2. Connect the HDMI IN2 connector to the second HDMI source
(for
example, a DVD player 1) for the
TP-582T
.
2
3. Connect the ETHERNET RJ-45 connector to a network.
(for
example, a DVD player 2).
4. Connect the RS-232 9-pin D-sub connector to a computer.
5. Connect the IR 3.5mm mini jack to an IR emitter.
6. Connect the REMOTE CONTROL terminal block to an external set of
switches (not shown in
Figure 4
).
7. Connect the LINE OUT RJ-45 connector over CAT 5 twisted pair to the
TP-582R
LINE IN connector.
8. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in
Figure 4
).
1 On the TP-581T,
connect the HDMI IN connector to the HDMI source
2 There is no HDMI IN 2 connector for the TP-581T
