Kramer Electronics Ltd.
VIA GO²
– For Web Administrator: Configuring Settings – Gateway Management Pages
17
4. Click
AP Mode
and enter a new name in the SSID field and a new password.
Figure 13: AP Mode Setting Page
5. Select
Enable Internet
if your
VIA GO²
device is connected to a network with internet.
-OR-
Select
Activate Standalone Wifi
to create an autonomous network without Internet
access.
6. If you selected Enable Internet, you can also select
Enable Guest Mode
to let meeting
participants enable Access Point mode from the VIA taskbar menu.
), only the moderator can
enable the Access Point.
7. Click
Apply
.
The secure wireless guest access point is set up.
Connecting VIA GO² to Network Wirelessly
VIA GO²
enables you to wirelessly connect your
VIA GO²
device as a client device to your
main network.
To set up Client Wi-Fi mode:
1. Click
Device Management
>
Network Settings
.
The Network Settings page appears.
2. Click
WiFi
.
The WiFi tab appears.
3. Click the
Switch On or Off Wifi
switch.
The switch turns green and the WiFi settings appear.
