22
VP-28 - Operating the VP-28 Remotely
3. For Ethernet, enter the IP address and Port number of the device and click
Connect
.
To set the default IP address and Port number, press the
Default
button.
4. For a serial connection, select the required Com port from the drop-down
list.
5. Click
Connect
.
If the connection is successful, the window shown in
Figure 8
appears. If the
connection is not successful, a Timeout error message appears.
7.3
Switching an Input to the Output of the Group
To switch an input to the output of the group:
•
Click on the required input button to activate it.
The input is selected and the button changes to solid purple as shown in
Figure 11
.
Figure 11: Input Selection
7.4
Selecting a Master Audio Input
To select a master audio input:
1. Click on the
Master Audio
drop-down list as shown in
Figure 12
.
Figure 12: Master Audio Input Selection
2. Select the required audio input from the drop-down list.
The audio input is selected to switch to the master audio output.