24
VP-28 - Operating the VP-28 Remotely
7.6
Changing the Audio Levels
To change the audio levels:
•
Click, hold and slide on the required slider or click the up and down arrows
as shown in
Figure 15
.
The volume level changes accordingly.
Figure 15: Changing the Audio Levels
7.7
Muting Audio and Selecting the Talkover or Mix Audio
Modes
Figure 16: Muting Audio and Selecting the Talkover and Mix Modes
To mute the audio
:
•
Select the Mute check box.
The Master audio is muted.
Note
: The Mic input is not muted.
To select the Talkover and Mix audio modes:
1. Select the
Talkover
check box.
The Ta kover mode is selected and the presence of a microphone signal will
reduce the level of the master audio temporarily.
2. Select the
Mix
check box.
