Figure 1: VP-443 Presentation Switcher/Scaler Front Panel
#
Feature
Function
1
IR Receiver
Receives signals from the remote control transmitter
2
INPUT
Selector
Buttons
CV
Press to select the composite video 1 input (from 1 to 2)
3
Component
Press to select the component video input (from 1 to 2)
4
PC
Press to select the computer graphics input (from 1 to 2)
5
HDMI
Press to select the HDMI input (from 1 to 4)
6
BLANK Button
Press to toggle between a blank screen and the display; can be programmed to follow MUTE (see
Section
6.2.3
)
7
MUTE Button
Press to toggle between muting (blocking out the sound) and enabling the audio output
8
FREEZE Button
Press to freeze/unfreeze the output video image; can be programmed to follow MUTE (see
Section
6.2.3
)
9
MENU Button
Displays the OSD menu (see
Section
6.2
)
10
ENTER Button
Press to accept changes and change the SETUP parameters (see
Section
6.2
)
11
Navigation
Buttons
/- Button
Press to decrease numerical values or select from several definitions
When not within the OSD menu mode, press to reduce volume (for embedded HDMI inputs, this does not affect the embedded output)
12
Button
Press to move up the menu list values (see
Section
6.2
)
13
/+ Button
Press to increase numerical values or select from several definitions
When not within the OSD menu mode, press to increase volume (for embedded HDMI inputs, this does not affect the embedded output)
14
Button
Press to move down the menu list (see
Section
6.2
)
15
RESET TO XGA/720p
Button
Press to reset the video resolution to XGA or 720p
Press and hold for about 2 seconds to reset to XGA; or press and hold for about 5 seconds to reset to 720p
16
PANEL LOCK Button
Press and hold for about 2 seconds to lock/unlock the front panel buttons
6
VP
-4
4
3
–
Ov
e
rv
ie
w
