Kramer Electronics Ltd.
VP-444
– Defining VP-444 Presentation Switcher/Scaler
5
Figure 2:
VP-444
Presentation Switcher/Scaler
Rear Panel
#
Feature
Function
11 VIDEO INPUT
Connectors
HDMI
Connect to the HDMI source (from 1 to
10)
12
PC 15-pin HD
Connect to the computer graphics source
(from 1 to 2)
13 AUDIO INPUT
Unbalanced Stereo
Terminal Blocks
HDMI
Connect to the analog audio HDMI
source (from 1 to 10)
14
PC
Connect to the analog audio computer
graphics source (from 1 to 2)
15 AUDIO OUTPUTS
Balanced Stereo
Terminal Block
Connects to the balanced stereo analog
audio acceptor
16
S/PDIF 3.5 Mini
Jack Connector
Connects to a digital audio acceptor
17 Mains Socket
Connect the mains power cord
18 Mains Fuse Holder
Fuse for protecting the device
19 Power Switch
Switch for turning the unit ON or OFF
20 HDMI OUT 1 Connector
Connect to the HDMI acceptor 1
21 HDMI OUT 2 Connector
Connect to the HDMI acceptor 2
22
COND / DYN Switch for MIC 1
Move up to select a condenser type
microphone; down to select a dynamic
type microphone
23 MIC 1 6mm Jack
Connect to the microphone source 1
24
COND / DYN Switch for MIC 2
Move up to select a condenser type
microphone; down to select a dynamic
type microphone
25 MIC 2 6mm Jack
Connect to the microphone source 2
26 RS-232 9-pin D-sub Port
Connect to the PC or the remote
controller
27 PROG
For factory use only
28 ETHERNET Connector
Connects to the PC or other Serial
Controller through computer networking