Kramer Electronics Ltd.
VP-444
– Using Embedded Web Pages
22
Selecting Input to be Switched to Outputs
To select the input to be switched to the outputs using the web pages:
1. Click
Input Select
on the Navigation List.
The Input Select page appears (
2. In the Video Switching area, click the required input button.
The input button turns green, the corresponding INPUT LED on the front panel lights and
the selected input is switched to the output.
Freezing or Clearing Video Output
To freeze or clear the video output, do one of the following:
1. Click
Input Select
on the Navigation List.
The Input Select page appears (
2. In the Video Switching area, click one of the following:
▪
– Freezes the currently displayed video frame.
▪
– Clears the video output from the display; the display goes blank.
Adjusting Microphone and Output Volume
The microphones and output volume can also be adjusted from the Audio web page.
To adjust the microphone and output volume:
1. Click
Input Select
on the Navigation List.
The Input Select page appears (
2. Use the slider controls in the Volume area of the web page.
3. Click
to mute the output.