Operating the VP-501xl/VP-502xl
11
When disconnecting the unit, the setup that was saved last will be stored and
will reappear when connecting the unit once again.
Consider the following sequence, for example:
•
A certain setup is saved to 1
•
A different setup is saved to 2
•
Setup 1 is recalled
•
The unit is disconnected
•
The unit is reconnected
•
Setup 2 appears (since it was saved last)
8.5.1 Saving When Exiting the Menu
Whenever a change in the setup is performed, you are prompted to save the
changes
1
•
Select No to cancel setup changes
, be it recalling a different setup, or changing the Zoom mode:
•
Select Yes to save setup changes.
Changes will be saved to the setup number currently appearing
next to the Save item
2
8.5.2 Recalling a Setup
To recall a setup select Recall from the advanced menu and select the setup
number you want to recall.
1 The Save Setting item does not timeout, it remains until No or Yes is selected
2 You should be aware that your setup will be saved to one of the 4 setups and will overwrite the previous setup associated
with this setup number
