Connecting the VP-501xl
5
6
Connecting the VP-501xl
To connect your
VP-501xl
as the example in
Figure 3
illustrates, do the
following
1
1. Connect a computer graphics source to the 15-pin HD INPUT connector.
:
2. Connect the Y/C OUT 4-pin connector to the Y/C acceptor (for example, an
s-Video recorder) and/or the CV OUT BNC connector to the CV acceptor
(for example, a composite video recorder).
3. Set the DIP-switches (see section
8.6
).
4. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
Adjust the scan converter features if required (see section
8.3
).
Figure 3: Connecting the VP-501xl
1 Switch OFF the power on each device before connecting it to your VP-501xl. After powering up your VP-501xl, switch on
the power on each device.
