Kramer Electronics Ltd.
VP-551X
– Operating and Controlling the VP-551X
14
Menu Item
Function
MIC SETTINGS
MIC MODE
Set to OFF (default), MIXER, TALKOVER or MIC ONLY.
MIC SELECT
Set to MIC 1 (default), MIC 2 or BOTH.
When MIC MODE is set to TALKOVER (see
), set
the following:
DEPTH [%]
Set the depth value to determine the decrease of the audio
level during microphone takeover (press + to further
decrease the talkover audio output level; press
– to lessen
the talkover output audio decrease level).
TRIGGER [dB]
Set the trigger value to determine the microphone threshold
level that triggers the audio output-level decrease.
ATTACK TIME
Set the attack time to set the
transition
time of the audio level
reduction
after the signal rises above the threshold level.
HOLD TIME
Set the hold time to define the time period talkover remains
active although the signal falls below the threshold level (for
a short period of time).
RELEASE TIME
Set the release time to define the transition time for the
audio level to return from its reduced level to its normal level
after the Hold Time period.
MIC VOLUME
Set microphone volume (MIC 1, MIC 2).
Embedded in -> out
Apply DSP (default) to the embedded audio or BYPASS it.
Talkover Mode
Figure 10: Talkover Mode
DRAFT
