Kramer Electronics Ltd.
VP-551X
– Using the Embedded Web Pages
24
Editing an Input
To Edit an Input Button:
1. In the Navigation pane, click
Input Select
. The Input Select page appears.
2. In the Video switching area, click the
button in an HDMI/CV/PC button to edit that
input.
Figure 17: Input Select Page
– Editing an Input Button
3. Edit the following features:
▪
Change the input name and click
.
▪
Set the input
Audio Volume
.
▪
For HDMI inputs only, set the HDCP on the input to ON or OFF.
If HDCP is disabled on an input, an HDCP encrypted source will not pass
through the unit.
▪
For HDMI inputs only, select an analog or embedded audio source or set input audio
selection to automatic:
Automatic
– The embedded audio on the HDMI input is selected for an HDMI
signal, or the analog audio input is selected if the input is not HDMI (for example,
for a DVI input signal).
Analog
– The analog audio input is selected.
Embedded
– The embedded audio in the HDMI signal is selected.
4. To exit, click .
Setting the Volume
To set the mic and output volumes:
1. In the Navigation pane, click
Input Select
. The Input Select page appears.
2. Use the Volume sliders to:
▪
Set MIC 1/MIC 2 volume.
▪
Set the Output (LINE OUT
) volume.
You can also set a specific volume by entering the volume value in the text box above a
slider and pressing
Enter
on your PC.
3. Click Mute icon to mute line /speaker audio signal.
22
DRAFT
