VP-553xl –
Using the Embedded Web Pages
35
To switch separate audio and video inputs to an output (for example, selecting the
video from INPUT 3 and the PC2 audio signal from INPUT 8, see the output 2
button in
):
1. Click an output button.
The button changes color to purple.
2. Click the video icon
on Input 3.
The output 2 button displays
from input 3
next to the video icon.
3. Click the audio icon
on Input 8.
The Output 2 button displays
PC2
next to the audio icon.
7.3
The Scaler Page
The Scaler page lets you set the output 1 and output 2 picture and PC mode
separately.
shows the Scaler page for output 1 which includes the picture setup and
the PC mode setup.
Note that when the PC inputs are connected all the settings are
available. If TP is selected, only the WXGA/XGA is enabled otherwise,
PC mode is disabled.
Figure 20: The Scaler Page – Output 1
i
