VS-1616D - Using the Input / Output Cards
49
9
Using the Input / Output Cards
This section defines the input / output cards and their relevant parameters.
Not all options are displayed for every menu selection. Some
parameters depend on the specific selection of other parameters.
The volume control provides only attenuation, not gain. Hence,
setting volume to 100% provides 0 attenuation.
9.1
Defining the AAD-IN2-F16 / AAD-OUT2-F16
The
AAD-IN2-F16
is a 2-Input Analog & Digital Audio Card (F-16):
The
AAD-OUT2-F16
is a 2-Output Analog & Digital Audio Card (F-16):
9.1.1
AAD-IN2-F16 / AAD-OUT2-F16 Configuration
The
AAD-IN2-F16
configuration table appears as follows:
AAD-IN2-F16 Input Card
Parameter
Description
Default
Pattern
RGB Bar, Black.
RGB Bar
Reset Input
Re-power—Power cycles the port.
Factory Reset—Performs a factory reset of the port to default values.
Re-power
Audio Select
Selects the audio source:
Auto—Audio signal selection is controlled by the presence or
absence of a plug in the RCA port. When present, AUD-Digital is
selected, when absent, AUD-Analog is selected.
AUD-Digital—Digital audio is selected from the RCA ports.
AUD-Analog—Analog audio from the 5-pin terminal blocks is
selected.
Auto
