VS-1616D - Using the Input / Output Cards
61
9.8.1
HAA-IN2-F16 / HAA-OUT2-F16 Configuration
The HAA-IN2-F16 configuration table appears as follows:
HAA-IN2-F16 Input Card
Parameter
Description
Default
Reset Input
Re-power—Power cycles the port.
Factory—Performs a factory reset to default values of the port.
Re-power
HDCP
Turn HDCP on and off.
*0=EN, 1=DIS.
Note
: Analog audio is still transmitted when HDCP is disabled.
0
Volume
Sets the audio output volume (0–70).
50
Audio Balance
Sets the audio output channel balance (0–100).
50
Audio Bass
Sets the audio output bass level (0–15).
7
Audio Treble
Sets the audio output treble level (0–15).
7
Audio Mute
MUTE: mutes the audio input.
Non-MUTE: unmutes the audio input.
Non-MUTE
Audio Select
AUD-Digital—Digital audio is selected.
AUD-Analog—Analog audio from the 3.5mm mini jack is selected.
AUD-Digital
The
HAA-OUT2-F16
configuration table appears as follows:
HAA-OUT2-F16 Output Card
Parameter
Description
Default
Reset Output
Re-power—Power cycles the port.
Factory—Performs a factory reset to default values of the port.
Re-power
Volume
Sets the audio output volume (0–70).
50
Audio Balance
Sets the audio output channel balance (0–100).
50
Audio Bass
Sets the audio output bass level (0–15).
7
Audio Treble
Sets the audio output treble level (0–15).
7
Audio Mute
MUTE: mutes the audio input.
Non-MUTE: unmutes the audio input.
Note
: When set to Mute, any change to the audio parameters
automatically sets this to unmute.
Non-MUTE
Audio Mono
OFF—Analog output is stereo.
MIX—Analog output is mono.
OFF
Audio Select
Selects the audio source:
Auto—Audio signal selection is controlled by the presence or
absence of a plug in the 3.5mm mini jack. When present, AUD-
Analog is selected, when absent, AUD-Digital is selected.
AUD-Digital—Digital audio is selected.
AUD-Analog—Analog audio from the 3.5mm mini jack is selected.
Auto
