82
VS-1616D - Using the Input / Output Cards
VGAA-IN2-F16 Input Card
Parameter
Description
Default
Vertical-Active
Set the value for vertical active pixels.
(1–3000)
As detected
Save Timing Para
(0–31)
N/A
Recall Timing Para
(0–31)
N/A
Volume
Sets the audio output volume (0–70).
50
Audio Balance
Sets the audio output channel balance (0–100).
50
Audio Bass
Sets the audio output bass level (0–15).
7
Audio Treble
Sets the audio output treble level (0–15).
7
Audio Mute
MUTE—Mutes the audio input.
Non-MUTE—Unmutes the audio input.
Note
: When set to Mute, any change to the audio parameters
automatically sets this to unmute.
Non-MUTE
R-offset
(0–63)
32
G-offset
(0–63)
32
B-offset
(0–63)
32
R-gain
(0–63)
32
G-gain
(0–63)
32
B-gain
(0–63)
32
The Auto Adjust feature requires the device to recalculate the
parameters based on the currently connected source. The result may
be different from the standard parameters for the currently set
resolution. The result is saved in non-volatile memory and is recalled
when the same source is used again. In order to revert to auto
predefined parameters, either reset to factory setting with the
relevant source connected or connect a different source.
The
VGAA-OUT2-F16
configuration table appears as follows:
VGAA-OUT2-F16 Output Card
Parameter
Description
Default
Reset Output
Re-power: power cycles the port.
Factory: performs a factory reset of the port to default values.
Re-power
Switch Speed
When switching between different sources the switching time can be
reduced by setting the fast switch level (Ex-fast Switch, Fast Switch
or Normal Switch).
Normal
Switch
Volume
Sets the audio output volume (0–70).
50
Audio Balance
Sets the audio output channel balance (0–100).
50
Audio Bass
Sets the audio output bass level (0–15).
7
Audio Treble
Sets the audio output treble level (0–15).
7
Audio Mute
MUTE: mutes the audio input.
Non-MUTE: unmutes the audio input.
Note
: When set to Mute, any change to the audio parameters
automatically sets this to unmute.
Non-MUTE
OUT_HSYNC_
INVERT
Sets the H_SYNC invert.
(0, 1)
0
