64
VS-1616D - Using the Input / Output Cards
DIMENSIONS:
19cm x 13cm x 2cm (7.5” x 5.1” x 0.8”) W, D, H
PRODUCT WEIGHT:
0.23 kg (0.51 lbs) approx.
SHIPPING WEIGHT:
0.37 kg (0.82 lbs) approx.
STANDARD COMPLIANCE:
HDCP 1.4, HDMI 1.3a
SAFETY REGULATORY
COMPLIANCE:
CE
ENVIRONMENTAL REGULATORY
COMPLIANCE:
Complies with appropriate requirements of RoHs and WEEE
9.10
Defining the HDBT-IN2-F16 / HDBT-OUT2-F16
The
HDBT-IN2-F16
is a 2-Input HDMI over HDBaseT Card (F-16):
The
HDBT-OUT2-F16
is a 2-Output HDMI over HDBaseT Card (F-16):
HDBT Input Cards
: The chassis is limited to a maximum of three HDBT input
cards due to thermal constraints. When installing these input cards they must
occupy input slots IN 5~8, IN 9~12, and IN 13~16 (in that order, as needed). Input
slot IN 1~4 must be left unpopulated and sealed with a blank cover. Contact
Kramer Electronics for more information on installing a fourth HDBT input card.
The HDBT input card limitations are only relevant for the
VS-1616D
.
This limitation is not applicable to the
VS-1616DT
and the
VS-1616DN
which may be fully populated with HDBT input and
output cards.
HDBT Output Cards
: There is no limitation on the number or type of output cards
that can be installed.
The
HDBT-IN2-F16
and
HDBT-OUT2-F16
cards include a terminal block for
connecting via RS-232 or an IR emitter, such as the
C-A35M/IRE
, or an IR
