KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating Your Audio-Video Matrix Switcher
22
7.2.2
Confirming Settings
Choose to work in the
AT ONCE
mode or the
CONFIRM
mode:
In the
AT ONCE
(default
1
•
Actions require no user confirmation
) mode:
•
Execution is immediate
•
No protection is offered against changing an action in error
In the
CONFIRM
mode
2
•
You have an optional method to help avoid making a mistake
:
•
Every action requires user confirmation
•
Execution is delayed
3
•
Protection is offered to prevent erroneous switching
until the user confirms the action
•
You can key-in several actions and then confirm them by pressing
the TAKE button once, to simultaneously switch several outputs
7.2.2.1 Toggling between the AT ONCE and CONFIRM Modes
To toggle between the AT ONCE (default) mode and the CONFIRM mode,
press the TAKE button.
In CONFIRM mode: Actions require user confirmation and the TAKE LED lights.
In AT ONCE mode: Actions do not require user confirmation and the TAKE
LED does not light.
When the TAKE LED blinks:
•
You cannot toggle between the AT ONCE and CONFIRM modes
•
You can execute the previous action, by pressing the TAKE button
•
You can cancel the previous action, by pressing a non-relevant
button (for example, the MENU button)
1 For all actions except storing/recalling setups
2 The CONFIRM mode is the default for storing/recalling setups (see section 8.5)
3 Failure to press the TAKE button within about 30 seconds (the Timeout) will abort the action
Summary of Contents for VS-162AV
Page 52: ......
