Operating Your VS-162AVM
25
25
2. Press the AUDIO (for audio control only) button.
If the AUDIO button illuminates, all operations and the LCD MATRIX and
STATUS displays relate to audio.
To set the
AFV
(audio-follow-video) mode
1
, in which all operations relate
to both the video and the audio channels
2
1. Press the AFV button.
:
2. If the audio and video configurations are the same, the AFV button
illuminates. All operations and the LCD MATRIX and STATUS displays
relate to both the video and the audio channels.
3. If the audio configuration differs from the video configuration, each of the
following occurs simultaneously:
•
The audio and video buttons flash in a fast alternating cycle
•
The TAKE LED flashes
•
In the MATRIX display, digits that represent different
audio/video configurations flashes alternately
(For example, the MATRIX display would show as the input
for output 10, the flashing, alternating digits 01 and 02, if IN
1 was routed to OUT 10 for video, and IN 2 was routed to
OUT 10 for audio)
4. Press the TAKE button to confirm the modification (reconfiguring the audio
according to the video).
10.5 Confirming Settings
Choose to work in the
AT ONCE
mode or the
CONFIRM
mode:
In the
AT ONCE
(default
3
•
Actions require no user confirmation
) mode:
•
Execution is immediate
•
No protection is offered against changing an action in error
In the
CONFIRM
mode
4
•
You have an optional method to help avoid making a mistake
:
•
Every action requires user confirmation
1 Be aware that all audio configurations that differ from the video configurations are lost when returning to the audio
breakaway mode after the AFV mode. To store an audio configuration setup, see section
10.8.1
2 Audio and video connections are the same and switch at the same moment at the beginning of the sync
3 For all actions except storing/recalling setups
4 The CONFIRM mode is the default for storing/recalling setups (see section
11.5
)
Summary of Contents for VS-162AVM
Page 7: ...Getting Started 3 ...
