KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring the VS-162V Video Matrix Switcher
16
7.3.1 Configuring a 32x16 Switcher
A 32x16 switcher consists of two
VS-162V
units (MACHINE ADDRESS #
1 and MACHINE ADDRESS # 7), as shown in
Figure 8
. To make this
configuration, as shown in
Figure 9
:
1. Set the MACHINE # on both
VS-162V
units to #1 (see section
8.2
).
2. Set the MACHINE ADDRESS # on one
VS-162V
unit to 1 and on the
other
VS-162V
unit to 7 (refer to
Figure 8
).
3.
Set DIP 6 OFF
on both
VS-162V
units.
4. Using T-connectors, connect OUTPUTS 1 to 16 on both
VS-162V
units.
OUTPUTS 1 to 16 become the SYSTEM OUTPUTS 1 to 16, while the
inputs on the MACHINE ADDRESS # 1 are system inputs 1 to 16, and the
inputs on the MACHINE ADDRESS # 7 are system inputs 17 to 32.
The two
VS-162V
units form a 32x16 switcher.
Figure 9: Configuring a 32x16 Switcher
